Description
xTool SafetyPro™ AP2 - Replacement Filters
Keep your AP2 performing like new. Choose the exact filter you need to maintain clean, safe air in your DTF and apparel-printing workspace.
Available Options:
| SafetyPro AP2 Air Purifier | SafetyPro AP2 Filters | SafetyPro AP2 Max Air Purifier | SafetyPro AP2 Max Filters |
|---|
 |  |  |  |
- DTF or Desktop-Grade Laser Purification
- For xTool DTF and desktop lasers (S1, P2, D1, F1)
- 150 m³/h airflow
- 6-layer filtration system
- 36 cyclone particle separators
- Removes smoke and VOC fumes
- Quiet desktop operation (55 dB)
| - 6-stage filtration, 5 replaceable filters
- 1 x Pre-filter
- 1 x Medium-efficiency filter
- 1 x Activated carbon filter
- 1 x Carbon mesh filter
- 1 x High-efficiency HEPA filter
| - Industrial-Grade Purification
- For xTool P3, F2 Ultra & large lasers (also great for DTF)
- 700 m³/h Airflow
- 7-Layer filtration system
- 72 Cyclones
- Removes smoke and VOC fumes
- Quiet desktop operation (65 dB)
- 4x Higher Dust Capacity Filters
| - 7-stage filtration, 6 replaceable filters
- 1 x Pre-filter
- 1 x Medium-efficiency filter
- 1 x Activated carbon filter
- 1 x Ultra-Dense Carbon Mesh Filter
- 1 x KM Formaldehyde Filter
- 1 x High-Efficiency (HEPA) Filter
|
| $999.00 view item | $20.00 | $2,349.00 view item | $89.00 view item |
Available Filter Types
- Pre-Filter - Captures larger dust and fibers to protect downstream filters and extend their lifespan.
- Medium-Efficiency Filter - Traps fine particulate (PM) before HEPA stage for steadier airflow and longer service life.
- Activated Carbon Layer - Adsorbs odors and VOCs generated during curing/powdering and heat processing.
- Ultra-Dense Carbon Mesh - High-surface-area carbon matrix for stubborn fumes/odors.
- High-Efficiency (HEPA) Filter - Final particulate capture for clean, breathable exhaust air.
- 5-Pack - Get all filters as Save! Includes 1 each Pre-Filter, Medium Efficiency, Activated Carbon, Ultra-Dense Carbon Mesh, High Efficiency HEPA.
Select and purchase filters individually as needed. AP2 features a multi-stage path; replacing the right stage at the right time reduces cost and downtime.
Why Replace Regularly
- Performance: Clogged filters reduce suction and can lead to odor or smoke leakage.
- Longevity: Upstream stages (pre/medium) protect HEPA and carbon media from premature loading.
- Air Quality: Fresh carbon layers maintain odor/VOC adsorption efficiency for indoor compliance.
Typical service lifespans vary by use; individual AP2 filters commonly span roughly 100-600 hours of operation. Monitor airflow/odor and replace as needed.
Installation (Quick Steps)
- Power off AP2 and disconnect the power cable.
- Open the magnetic filter door and note the filter order.
- Remove the spent filter; vacuum any loose dust in the chamber.
- Unwrap the new filter and install with the airflow arrow in the correct direction.
- Close the door, reconnect power, and run the unit on high for 1-2 minutes to seat the media.
Clean/empty the cyclone pre-stage regularly to extend filter life. Always follow the official user guide for safety and detailed steps.
Compatibility
These filters are designed specifically for the xTool SafetyPro™ AP2 air purifier. (AP2 Max uses a different filter set.)
